Filter
Top Products
System Parameters Customization
52 Administrator Guide
NVIKEP1AUTHALG
0 This parameter contains the
authentication algorithms to
propose for IKE phase 1 security
association. Values are:
0=ANY
1=MD5
2=SHA1
The security device selects the
algorithm mandated by the
administrator. Priority order of
algorithms proposed by the
VPNremote Phone is
MD5,SHA1.
In very rare circumstances, the
security device may not be able
to handle multiple proposals. In
this cases, only try overriding the
default behavior.
To set the authentication
algorithm to SHA 1, use the
following command:
SET NVIKEP1AUTHALG 1
NVIKEP2AUTHALG
0 This parameter contains the
authentication algorithms) to
propose for IKE phase 2 security
association. Values are:
0=ANY
1=MD5
2=SHA1
The security device selects the
algorithm mandated by the
administrator. Priority order of
algorithms proposed by the
VPNremote Phone is
MD5,SHA1.
In very rare circumstances, the
security device may not be able
to handle multiple proposals. In
this cases, only try overriding the
default behavior.
To set the authentication
algorithm to SHA 1, use the
following command:
SET NVIKEP2AUTHALG 1
Table 6: VPNremote for 4600 Series IP Telephones Specific Customizable System
Parameters (continued)
Parameter Name Default
Value
Description and Value Range Example
7 of 8