Filter
Top Products
Issue 2 July 2006 49
NVIKEDHGRP 2 This parameter contains the
value of Diffe-Hellman (DH)
group. The DH group is used
during phase 1 negotiation.
Values are:
1= DH group 1
2=DH group 2
5=DH group 5
14=DH group 14
15=DH group 15
To set the DH group to group 1,
use the following command:
SET NVIKEDHGRP 1
NVPFSDHGRP 0 This parameter contains the
value of Diffe-Hellman (DH)
group. The DH group is used
during phase 2 negotiation for
establishing IPsec security
associations also known as
perfect forward secrecy (PFS).
Values are:
0=No PFS
1=DH group 1
2=DH group 2
5=DH group 5
To set the DH group to group 2 for
phase PFS, use the following
command"
SET NVPFSDHGRP
NVIKEIDTYPE The
default
value
depend
s on
the
value
of
NVVP
NCFG
PROF.
This parameter contains the
IKE Identifier type for the IKE ID
specified in the NVIKEID
parameter. Values are:
1=IP address
2= FQDN
3=User FQDN (E-Mail)
9=Directory name
11=KEY-ID (Opaque)
To set the IKE identifier type to
FQDN, use the following
command:
SET NVIKEIDTYPE 2
Table 6: VPNremote for 4600 Series IP Telephones Specific Customizable System
Parameters (continued)
Parameter Name Default
Value
Description and Value Range Example
4 of 8