Filter
Top Products
System Parameters Customization
42 Administrator Guide
NVVPNCONCHECK
1 This parameter decides if the
connectivity check should be
performed after establishing the
VPN tunnel, and how it should
behave in the event of
connectivity check failure. Values
are:
1=First time
2= Never
3= Always
Description:
The tunnel connectivity check is
performed after the VPN tunnel is
established. If connectivity check
fails, the tunnel is established with
a different encapsulation method
until all the available
encapsulation method are
attempted or connectivity check is
successful.
To set the connectivity check
value to 2, use the following
command:
SET NVVPNCONCHECK 2
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value
Description and Value Range Example
12 of 15