Filter
Top Products
System Parameters Customization
36 Administrator Guide
NVVPNUSER “” (Null) This parameter controls the user
name to be used during
authentication and VPN tunnel
setup.
Each VPNremote Phone should
be configured with a unique user
name. A unique user name can
be configured during the initial
VPN setup.
The VPNremote Phone is
capable of using the phone's
mac address or serial number as
user name. This capability
eliminates the need to enter the
user name by the phone user
using the phone keypad. In
these cases you must add each
device mac address or serial
number to your authentication
database.
This value range is up to 30
ASCII characters.
To set the user name as the
device mac address, use the
following command:
SET NVVPNUSER %MACADDR%
To set the user name as the
device serial number, use the
following command:
SET NVVPNUSER
%SERIALNUM%
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value
Description and Value Range Example
6 of 15