Filter
Top Products
15
The Conference feature allows you to conference up to six parties (including
yourself) on a call.
To add another party to a call
1. Press .
2. When you hear dial tone, dial the number of the person you want to
add to the call.
3. Wait for an answer.
4. To add the person to the call, press again.
(If the called party does not answer or does not want to join the
conference, press . Then, you can return to the held call by
pressing its call appearance button.
5. Repeat Steps 1 through 4 for additional conference connections.
To add a held call to an active call
1. Press .
2. Press the call appearance button (a or b) corresponding to the held
call.
3. Press again.
To remove the last person added to the conference call
When active on the conference call, press .
Getting Messages
Your Message lamp turns on when a caller has left a message for you. Press
to retrieve your messages, and follow the prompts.
Note: Certain features must be programmed by your system manager to
activate the button. Please see your system manager if the
message lamp is not working properly. See Chapter 21, “Features and
Technical Reference,” of the Administrator’s Guide for Avaya
Communication Manager Software, Document No. 555-233-506 for
Message button programming information.
Conference
Message