Filter
Top Products
30 Avanti 3020 and Avanti 3015D sets
MEMORY BUTTONS
Memory buttons are used for one-press dialing of exten-
sions and feature access codes.
To dial with a MEMORY button
• Press the programmed button.
To program a MEMORY button
1. Press
[FEATURE]
.
2. Press
[SPEED DIAL/PROGRAM]
.
3. Press the MEMORY button to be programmed.
4. Dial the desired extension number (up to four digits)
or
Press
[FEATURE]
and then dial the desired feature
code.
See the Feature Codes Table at the end of this guide.
5. Hang up.
PHONE BOOK
You can use the Phone Book feature to dial a number from
your private Phone Book list (which you program), or from
one of the ten Phone Book lists your System Administrator
may have programmed.
The Phone Book entries are stored in speed dial bins in
alphabetical order. When you program a Phone Book entry,
it is stored in an available speed dial bin and has a name
associated with it. If you change the number stored in that
speed dial bin by the method described on the previous
page (“
To program a speed dial bin number or speed
dial button
”), you also change the number for the Phone
Book entry.
You can use the Phone Book feature to dial a number only
when your telephone set is in idle state. You can make
entries into the Phone Book when the telephone is idle or
during a conversation, by programming a speed dial bin
with the number and name.
3020&3015D.txt.book Page 30 Tuesday, August 3, 1999 1:14 PM