Filter
Top Products
Section 2A:Your Sprint PCS Vision Phone – The Basics 13
Note: Long backlight settings, searching for service, vibrate mode, and browser
use affect the battery’s talk and standby times.
Tip: Be sure to watch your phone’s battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
To install your phone's Li-Ion battery:
ᮣ
Insert the battery according to the illustration below: (1) Place
the battery on the back of the handset and slide into place, then
(2) push the battery down until it locks into place.
Removing the Battery
To remove your battery, follow these easy steps:
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. Remove the battery according to the illustration below:
(1) Push up the release latch, lift up the battery, and battery,
then (2) remove the battery from the handset.
SPRINT_TX115C041021_A 2004.10.25 8:58 PM Page 13