![](http://pdfasset.owneriq.net/d/1c/d1c57bd5-0840-406a-93ed-343b90ef277d/d1c57bd5-0840-406a-93ed-343b90ef277d-bgf.png)
GX2401c I/B version 09050A-1
09050A-1 14
OWNER’S MANUAL#GX2401c VER.09050A-1
PAGE:
14
English version
Select the appropriate dialing service by moving the
T / P (Tone / Pulse) switch on the bottom of the base unit:
•
TONE for Tone service, or
• PULSE for Rotary service.
T / P
(Figure 11)
SETTING THE HANDSET RINGER ON / OFF
The handset ringer must be set to ring ON position in order to ring when receiving an
incoming call. See PROGRAMMING MODE section on page 20.
SETTING USER'S AREA CODE AND NEIGHBORING AREA CODESETTING USER'S AREA CODE AND NEIGHBORING AREA CODE
In order to use callback function, the user's area code and neighboring area code
must be programmed. Neighboring area code is optional. See PROGRAMMING MODE section
on page 19.
SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION
The CIDCW function must be set to ON position in order to use CIDCW function. See
PROGRAMMING MODE section on page 19.
TELEPHONE OPERATION
TO PLACE A CALL IN TALK MODE
1. Press the TALK button on the handset. The LCD Display
will show "TALK" and the symbol
will flash while the unit auto-scans
and will light steadily when it finds a clear channel. (Figure 12)
2. Listen for a dial tone.
3. Dial the telephone number. The phone numbers appear on the LCD Display as you enter
the number.
4. When finished with your call, press the TALK button or place the handset on the base
unit.
TO PLACE A CALL IN STANDBY MODE (PREDIAL MODE)
1. Ensure that the unit is in standby mode. The handset and base unit IN USE LED
indicator is off.
2.
Dial the telephone number or press RE / PA button. If you make a mistake, press
button to delete the character on the left of the cursor.
3.
Press C. BACK button.
4.
When finished with your call, press the TALK button or place the handset on the base
unit.
TO RECEIVE A CALL
NOTE:
If you are expecting incoming calls, the handset must be programmed to RING ON
mode. See PROGRAMMING MODE section on page 20.
A. IF THE HANDSET IS ON THE BASE UNIT
1.
Since the GX2401c features ”Auto-Answer”, simply pick up the handset from the base
cradle when the phone rings. The LCD Display will show " TALK" and the
symbol
will light steadily.
2.
Start your conversation.
3.
To end your conversation, either press the TALK button or place the handset on the base
unit.