Audiovox GMRS-1500 Two-Way Radio User Manual


 
NOTE: You can use the scan tune (S ) function to more quickly establish the
preset station frequencies.
5. Press the left menu button until 1 begins to flash again; then press the Up (6)
button to increment the preset to number 2 which also flashes.
6. Repeat steps 4 and 5 to establish the second preset station frequency.
7. Repeat step 6 to increment the preset number to 3 and repeat steps 4 and 5.
8. Continue with presets 4 through 9 as indicated.
9. Press the right menu button, scrolling through S, T and MEM; then press again
to access OFF or WAY.
10. If OFF appears flashing, and you wish to turn off FM radio reception whenever
other modes are being used, press the Monitor (M) button to confirm. If WAY is
flashing, and you wish to continue FM radio reception while other modes are
being used, press the Monitor (M) button to confirm.
NOTE: When WAY is selected, FM broadcast can be heard in all modes except
for Weather band. During GMRS transmission and reception, the FM
program is interrupted and will resume when transmission or
reception ends.
WEATHER MODE
NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION (NOAA)
RECEIVER MODE
NOAA provides transmitters which are located throughout the United States; these
transmitters broadcast National Weather Service warnings, watches forecasts and
hazard information 24 hours a day.
The NOAA receiver on the GMRS-1500XTM provides you with weather information for
all types of hazards. This function allows you to listen to one of 10 weather channels,
and to configure your radio in the NOAA alert mode to inform you of emergency weather
broadcasts in your listening area. To access the NOAA functions, proceed as follows:
NOAA WEATHER MENU
To access the NOAA channel menu:
1. From the GMRS TWO WAY mode (CH and CODE displayed), press the Func
tion (F) button twice; WEATHER is momentarily displayed, followed by the WEA
and channel indication (01-10).
2. Press the right menu button; the channel number flashes.
3. Press the Up button (6) or the Down button (11) to select the strongest of the
10 channels.
4. Press the Monitor (M) button to confirm channel selection.
16