Filter
Top Products
15
Up Channel/Volume Button (10, *12)
In the standby mode, pressing this button will increment the listening
volume. When in function edit mode this button will be used to adjust the
unit’s settings.
Down Channel/Volume Button (13, *12)
In the standby mode, pressing this button will decrement the listening
volume. When in function edit mode this button will be used to adjust the
unit’s settings.
Mode Button (15, *4)
This button is used to select the various FRS feature settings such as
channel/CTCSS code selection, VOX mode, etc.
External Speaker (SPK)/Microphone (MIC) Jack (6)
This jack accepts an Audiovox headset/microphone connector (optional
accessory). For additional optional equipment and accessories for the
FRS-3000PK, visit the Audiovox web site at www.audiovox.com.
Scan/Lock Button (9, *11)
Press this Button momentarily to enable or disable the scan mode. Press
and hold the button for more than 1 second to lock or unlock the key pad. All
buttons will be active in the lock mode except, MODE and SCAN. When the
keypad is locked, the (
) icon will display in the top left corner.
Operating Modes and Features
FRS Operation:
- From the FRS standby mode, press and hold the ( ) button for 2
seconds to turn on power.
- Press the MODE button so the Channel number flashes.
- Select the desired channel with the Up (10, *12) and Down (13, *12)
Buttons. When receiving a call, the monitor section of the Transmit/
Monitor LED lights green, and the signal strength meter, consisting
of a 5-bar graph, is displayed and indicates incoming received sig-
nal strength from minimum (a single bar) to maximum (five bars).