Filter
Top Products
-9-
BATTERY INSTALLATION
BATTERY SAVER MODE
Your FR-560FM has a unique circuit designed to dramatically
extend the life of its batteries. After 10 seconds of inactivity, the
FR-560FM will switch to battery saver mode. While in battery saver
mode, the battery saver mode indicator ( ) is present on the
display, and the transceiver will remain ready to receive any
incoming transmissions while the battery saver mode is active.
Pressing any of the buttons, except the up, down or power buttons,
will exit the battery saver mode and illuminate the display.
CAUTION:
Your FR-560FM requires three “AAA” alkaline
cells or three rechargeable “AAA” cells. Alkaline
batteries will provide the best performance from your
transceiver. Remove the battery cover by rotating
the belt clip away from the battery compartment.
Slide the battery cover downward while applying
pressure at the its grooved section. Observe the
polarity symbols inside the battery tray when installing
the batteries.
Incorrect battery installation can damage the unit.
The microphone / charger jack is intended for use with Audiovox
approved charging accessories only. Refer to the documentation
included with the battery charger.
Never attempt to charge alkaline batteries with the optional
battery charger.