Filter
Top Products
-8-
BATTERY INSTALLATION
Your FR-541 requires four AAA alkaline or four re-
chargeable AAA cells. Alkaline batteries will pro-
vide the best performance from your transceiver.
Remove the battery cover by releasing the clip latch
at the top, and sliding the clip up and away from the
back of the unit. Slide the battery cover downward
while applying pressure at the embossed arrow.
Observe the polarity symbols inside the battery tray
when installing the batteries.
CLIP
RELEASE
LATCH
EMBOSSED
ARROW
BATTERY
COVER
BATTERY SAVER MODE
Your FR-541 has a unique circuit designed to dramatically extend the life of its
batteries. After 5 seconds of inactivity, the FR-541 will switch to battery saver
mode. While in battery saver mode, the battery saver mode indicator ( ) is
present on the display, and the transceiver will remain ready to receive any in-
coming transmissions while the battery saver mode is active. Pressing any of
the buttons, except the up, down, Function (F) or VOX button will exit the battery
saver mode.