Filter
Top Products
Function Select Button
Pressing this button will sequentially allow selection of the channel
number or Continuous Tone Coded Squelch System. Pressing the
button once from the standby mode, will allow setting of the
channel number. This will be indicated by the slow flashing of
the channel number display. Pressing the button a second time
within 5 seconds will allow setting of the CTCSS code. This will
be indicated by the slow flashing of the code number. If no
buttons are pressed for 5 seconds, the unit will return to standby
mode and the display will indicate the current channel. Pressing
the Function Select button a third time or pressing the P (Push to
Talk) or monitor buttons will also return to the standby mode.
To Select a Channel
Press and release the function
select button until the channel
number flashes on the display. Use
the up and down buttons to select
the desired channel from 1 to 14.
The current channel setting will be
shown on the display.
Function
Select Button
Down
Button
Up
Button
-7-