Audiovox FR140 Two-Way Radio User Manual


 
BATTERY INSTALLATION
Your FR-140 requires three “AA” alkaline
cells or three rechargeable “AA” nickel -
cadmium cells. Alkaline batteries will
provide the best performance from your
transciever. Remove the battery cover by
releasing the clasp at the bottom of the
unit and lifting the cover from the battery
compartment. Observe the polarity symbols
inside the battery tray when installing the
batteries.
CAUTION: Incorrect battery installation
can damage the unit.
BATTERY SAVER MODE
Your FR-140 has a unique circuit designed to dramatically
extend the life of its batteries. Ten seconds after the transmit
button has been pressed, the FR-140 will switch to battery
saver mode. This will be indicated by the flashing PS (Power
Saver) icon. The transciever will remain ready to receive any
incoming transmissions while in the battery saver mode.
Pressing any of the buttons will exit the battery saver mode.
6