Filter
Top Products
NOISE OR\INTEf::!Fgf3~NCE-
Your AUDIOVOX DT921c cordless
telephone has auto-channel scan
circuitry which will detect excess noise
and change the channel of the phone
to reduce it. This is done automatically.
Since the AUDIOVOX DT921 c is a fully
digital phone, it does not suffer from
noise associated with regular cordless
phones. At times you may experience
occasional "drop outs", especially at
the extreme edges of the phone's
range. Simply move closer to the base
unit and this will disappear.
.
OUT OF RANGE WHEN. PHQNEIS
ON :.;. '~ .'I
If you are presently engaged in a phone
conversation move closer to the base.
If the base unit does not communicate
with the handset within 25 seconds of
losing contact, it will automatically
hang up.
AUTOM,ATIC SECUR.!TY CODING
Your AUDIOVOX DT921c phone is
factory set with 16.8 million possible
security codes. This unique security
code allows your handset and base to
recognize each other, and minimizes
the possibility of another cordless
phone using your telephone line.
."
OUT OF RANGE \YHE~ PHq.NE IS
OFF ., y " -,.1
.; ; "., ," -c.:;~~
If the phone is OFF, the handset and
base still monitor each other to make
sure that they can communicate. If the
handset is moved out of range, the
handset will make a series of beeps,
and will then display "CHANNEL
SERACHING" on t-he LCD. At 15
second intervals the handset will scan
all channels in an attempt to reestablish
communication with the base. This
process does not require user
intervention; the handset will re-Iink
with the base automatically once it is
brought back within range. The unit
will then be able to receive and place ---
calls.
+
-@-
I
OUT OF RANGE INDICATION
If the handset is moved to a point where
the base and handset can no longer
communicate, the handset will make a
quick series of beeps to signal Out of
Range.
If the handset is active when taken
out-of-range, it will beep twice a
second and enter standby mode after
25 seconds if the link is not
reestablished. If the handset is
brought back within range, it will
automatically re-Iink.
When the base unit is unplugged from
the power supply, the handset will give
the "Out of Range" warning beep. Plug
the base in again and this will stop.
For out-of-range in standby mode, the
handset will beep once and then at 1.5
second intervals, will display
"CHANNEL SERACHING" on the
LCD, and scan all channels in an
attempt to re-Iink with the base.
31
CT 921
31
I
~
S/1S/98. 11:13 AM