Filter
Top Products
~
However, when you dial directly from
CID memory, only the last 7 digits of
the received telephone number will be
used. Consequently, you would
actually dial this:
~f'
~:'e AUDIOVOX DT921 was designed
to accommodate this situation. If you
need to temporarily add a long distance
prefix and lor area code (such as 1503)
before the CID num~er, do the follow-
ing: .
.Beginning from the standby mode,
key in the necessary digits. your
displ~y will look like this:
~ -
I -~I ."\ r ~
~
~
~.
Then, to temporarily add the last 7
digits only from a CJD memory,
press CID .
.Using the 6 (;) and Q (#) keys.
scroll through the received calls to
locate the number you wish to dial.
.Once you have located the number
you wish to dial, simply press
TALK key. The last seven digits
will be added to the numbers
already in the LCD, and the whole
number shown below will be
automatically dialed.
The occasional appearance of
"TRANSMISSION ERROR" on your
display does not indicate a problem
with your unit or your telephone line.
However. if this appears frequently,
you may want to notify your telephone
company.
28
rF
d192I.p6S
28 1998/6122. PM 07:27
~
of the caller is unavailable, or if the
caller is outside the CID service area,
the message UNAVAI~BLE is dis-
played on the LCD.
If the caller has exercised the option
to block his or her number from being
sent, then the display will show
PRIVATE.
If an error is detected, then the CID
information is incomplete and will
not be displayed. "TRANSMISSION
ERROR" will be displayed on the LCD
screen.