Audiovox DT921C Cordless Telephone User Manual


 
w-
Storing Memory (Spe~d) Dial
numbers; ,
To program a speed dial location, do
the following:
With the phone OFF, enter the
telephone number you wish to
store. (20 Digits Maximum).
Unsuccessful programming can result
from not correctly completing the
programming sequence. For example,
if after entering a number on the LCO
and entering program mode, the OFF
key were pressed instead of entering
a valid memory location, the
"PROGRAMMING INCOMPLETE"
message would appear. If this
message appears, simply repeat the
programming sequence.
Enter program mode by pressing
PROG. The display will show the
following:
Enter th~ memory location (01..20)
you V:lish to store the number in.
As soon as the second memory
location digit is entered, the unit
~ill emit a happy tone (a short
series of beeps) to confirm
successful programming and exit
program mo,de.
+
+
If programming is unsuccessful the unit
will display:
24
DT '21
24
~
5/15/98, 11:13AM