Filter
Top Products
~
SET-UP
.Plug AC adaptor into a standard
electrical outlet and Base Unit
TO M UTE A CAL,L i, ' ,
.Press MUTE to disable the
handset microphone.
.Set Dial Mode switch to PULSE or
TONE. The unit is factory set to
TONE.
Press MUTE again to return to
normal two way conuersation.
.to PAGE THE HANDSET ~ ..,,:,~:;
.c .'
.To page from the base, press
PAGE.
.Let the handset battery pack charge
for 16 hours before first use.
.Connect telephone line cord to base
unit and telephone jack.
.To cancel the PAGE either press
PAGE again on the base or press
OFF on the handset.
MAKING CALLS
c .-., .Press the TALK key. When the
"PHONE ON" indicator is displayed
and you hear a dial tone, dial the
number.
SIORING MEMORY (SPEED) DIA.L.
NUMBERS: .;- ~. ',' .\"
.The phone should be OFF:
.Enter the number you wish to store
on the LCD up to a maximum of 20
digits.
OR
Enter the number to be dialed on
the LCD and then press the TALK
key.
I
-@-
I
+
ANSWERING CALLS .
.To answer a call, press any key
other than' OFF, MUTE. or the
Volume Keys. The handset will
NOT auto-answer when lifted off
the base cradle.
HANGIN~ UP
.Press OFF or place the handset
in the cradle to hang up a call.
TO PLACE A CALL ON HOLD
.Press HOLD on the handset
to place an active call on hold.
Press HOLD again to return to
the call.
.Press PROG .The LCD will
display "PROGRAM LOCATION--"
.Enter a two digit memory location
(01 ..20), the unit will store the
number, emit a happy tone to
confirm successful programming
and exit program mode.
18
18
~
5/15/98. 11:13AMDT ,U