Filter
Top Products
E - 11
SELECTING BASE STATION TO BE USED
When a handset is subscribed to several different base stations, the user selects which
should be used as follows:
• Press scroll keys 5/6(6) to select “ADVANCED”, then press
*
to confirm.
• Press scroll keys 5/6(6) again to select “CHOOSE”, then press YES (3) to confirm.
• Enter the PIN code then press YES (3) to confirm
• Press scroll keys 5/6(6) to select a base numbers, press YES (3) to confirm.
• Handset will show “Please wait” then “SEARCHING. . . “ is displayed.
• “H x” be shown on LCD if the base selection is successful. Else, “H ?” will be shown for
fail selection.
Note : If the handset is not subscribed to a base station, then selecting “CHOOSE” will cause
the warning “NO BASE” to be displayed for 3 seconds, before reverting to the menu.
If the handset is subscribed to one base station only, then the function will work as for a
multi-subscription system, but the user will not be able to change the base number.
Deleting all Handsets from a Base Station.
To remove subscribed handsets (H3, H4) from a Base station, press and hold the PAGE button
until the LED flashes twice and stops (flashing) (about 20 seconds). This will cause the Base
to delete the subscriptions of all additional handsets (H3, H4). It is not possible to remove
handset subscriptions individually.
SUBSCRIBING HANDSET TO BASE STATION
• After a few second, “H ?” will be shown on LCD.
Note : The handset will not automatically link with another Base that it is already subscribed
to. The user must select an existing Base station or subscribe to a new one.
9038_1_ib_e.p65 10/31/03, 12:13 PM11