AT&T merlin plus communications system Intercom System User Manual


  Open as PDF
of 6
 
●
When you hear a beep, speak into your handset.
or
●
Touch a Group Page button for one of the groups.
●
When you hear a beep, lift your handset and make
the announcement.
PROGRAMMING
AT&T
Loudspeaker Page. To make an announcement through a
loudspeaker paging system:
●
Touch Intercom.
●
Lift your handset.
●
Dial 6.
●
When you hear a beep, make your announcement
or
●
Touch
Loudspeaker Page.
●
When you hear a beep, lift your handset and make
your announcement.
MERLIN Plus
COMMUNICATIONS SYSTEM
LINE AND RINGING OPTIONS
Ringing Options. To program lines to ring immediately,
after a delay, or not at all:
●
Slide the T/P switch to P.
The voice terminal rings every 5 seconds.
●
Touch the line button.
●
Dial one of the following codes for the type of ringing
you want:
*35 for no ring
*36 for delayed ring
*37 for immediate ring
●
Slide the T/P switch to center.
Personalized Ringing. Select one of eight ringing patterns
that you like.
●
Slide the T/P switch to P.
You hear your voice terminal’s current ring.
Touch Speaker until you hear a ringing pattern you like.
●
Slide the T/P switch to center.
Automatic Line Selection. To control the order of the lines
that the system selects when you lift your handset:
●
Slide the T/P switch to P.
The voice terminal rings every 5 seconds.
● Dial **.
●
Touch the line buttons in the order you prefer.
●
Slide the T/P switch to center.
ADDITIONAL FEATURES
See the System Manual for information on these features:
Account Number Entry, Auto Answer-All, Hold Retrieve,
Ring Option Override, Touch-Tone Enable, Voice Announce-
ment Enable/Disable.
Follow these steps to program features onto your voice ter-
minal. For more information about programmable features,
see Section 5, “Reference,” in the System Manual.
1.
Label the button you want to program.
2.
Slide the T/P (Test/Program) switch to P.
The voice terminal rings every 5 seconds.
3. Touch the button you want to program.
4. Dial the feature’s programming code and any other re-
quired numbers.
5. Slide the T/P switch to the center position.
Feature Name
Programming Codes
Auto Intercom
*91 + intercom number
Do Not Disturb
*71
Group Page
Dial *91 + one of these
codes:
70 for all voice
terminals
71 for group 1
72 for group 2
Last Number Redial
*73
Loudspeaker Page
Dial *91 + 6
Manual Signaling
*6 + intercom number
Outside Auto Dial
*90 + outside number
Personal Speed Dial
Personal Speed Dial
(does not require a
code (#01 through #22)
button)
+ *90 + outside number
Privacy
*72
Saved Number Redial
*74
System Speed Dial
*95 + System Speed Dial
code (60 through 99)
User’s Card
Intercom Number
Your MERLIN Plus System voice terminal comes with
preassigned features, and you can use them immediate-
ly. You can also add features to your voice terminal to suit
individual and business needs. To do this, use the instruc-
tions found on the last page of this card.
For more information, refer to the MERLIN Plus System
Training Manual and Section 5, "Reference," in the
MERLIN Plus System Manual.
INTERCOM DIRECTORY
No.
Name
No.
Name
10
20
11
21
12
22
13
23
14
24
15
25
16
26
17
27
18
28
19
29
MERLIN is a registered trademark of AT&T
Copyright © 1986 by AT&T
Printed in the United States of America
999-502-144 IS
Issue 1, December 1986
next