AT&T CL82659 Cordless Telephone User Manual


 
Multiple handset use
27
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system
handset. This feature is not available for model CL82109 unless you have
purchased additional handsets (CL80109).
1. During a call, press INT.
If you have a two-handset system, the outside call
is put on hold and your handset screen shows
CALLING OTHER HANDSET. The other handset
rings and its screen shows OTHER HANDSET IS
CALLING.
If you have more than two handsets, your screen
shows TRANSFER TO: Use the dialing keys to enter
a handset number. The outside call is put on hold
and your handset screen shows CALLING
HANDSET X. The other handset rings and its screen
shows HANDSET X IS CALLING.
2. To answer the call on the other handset, press
PHONE/
FLASH, INT, SPEAKER or any dial pad
keys (0-9, #, *). The outside call is still on hold and both
handsets now show INTERCOM. You can now have a
private conversation between the system handsets.
3. From this intercom call, you have the following options:
You can let the other handset join you on the outside call in a three-
way conversation. Press and hold
INT on the calling handset.
You can transfer the call. Press OFF/
CLEAR, or
place your handset back in the telephone base or
charger. Your screen shows CALL TRANSFERED.
The other handset automatically connects to the
outside call.
You can alternate between the outside call (OUTSIDE CALL appears
on the screen) and the intercom call (INTERCOM appears on the
screen). Press INT on your handset to alternate.
The other person can end the intercom call by pressing
OFF/
CLEAR, or by placing the other handset back in the
telephone base or charger. The outside call continues with the
original system handset.
NOTES:
1. To cancel the transfer and return to the external call before the intercom call is
answered, press and hold
OFF/CLEAR, or press PHONE/FLASH or INT on your
handset.
2. If the other handset does not answer the intercom call within 100 seconds, or if the
other handset is in the directory or call log mode, or is out of range, the calling
handset shows UNABLE TO CALL TRY AGAIN on its screen and automatically
returns to the external call.
USBOTGFS!UP;
DBMMJOH
IBOETFU!Y
IBOETFU!Y
JT!DBMMJOH
JOUFSDPN
DBMM!USBOTGFSFE