Filter
Top Products
1 9
Handset Locator
¥
NOTE: If you have installed additional AT & T
2300 handsets (purchased sep a ra t e l y) with yo u r
2355 telep h o n e , selecting will signal
A L L idle re gi s t e red handsets.
To page the handset(s) from the base:
1 Press .
2 Use or to scroll through the list of
registered handsets. Highlight the desired
handset name or to signal all
registered handsets.
3 Press or .
The handset(s) will ring and their screen(s)
will show
To end the paging signal,press on the base
— OR —
Press on the handset(s).
Te m p o r a ry Tone Dialing
If you have dial pulse (rotary) service, you can change
from dial pulse to touch tone dialing during a call.
1 Make the call,and wait until it is connected.
2 P re s s . Keys pressed after this send touch
tone signals.
3 After you hang up, the phone automatically
re t u rns to dial pulse (ro t a ry) serv i c e .