Filter
Top Products
IP 710 Manual 10
Conference
button
Initiates a conference and
adds in other parties one at
a time.
• Single Call Waiting, Multiple
Call Waiting or Live Call
Waiting must be enabled for the
extension by the system
administrator or in AltiView/
AltiAgent in order to add incoming
calls to a conference.
• The user who initiates the
conference call can select another
conference member’s call and drop
it from the conference by
disconnecting the call. The feature
is unavailable to all other
conference members, even when
the conference initiator hangs up.
Workgroup
Status
Displays the workgroup
status in the LCD.
• The system administrator
configures which key will display
the workgroup status.
Flash button Signals PBX that special
instructions will follow.
Greeting
button
Lets user record greetings
and select a greeting to
play.
• Greetings are affiliated with
activity codes.
Headset
button
When pressed, the user
will be able to activate the
RJ-9 or 2.5mm headset
port.
• This button is used as a hook
switch for headset ports.
• User should specify in Phone
Setting > Headset Type which
headset port is being used.
Hold button Places an active call on
hold.
• When Multiple Call Waiting is
enabled at the extension, the user
can put multiple incoming calls on
hold and retrieve using the phone’s
/ buttons and Enter button.
• Pressing Hold while onhook will
retrieve the last hold call.
• Supports up to 9 hold calls.
Intercom
button
Connects you directly to
the callee’s intercom after
one ring.