Filter
Top Products
Alcatel-Lucent IP Touch 4008 / 4018 Phone & 4019 Digital Phone
www.alcatel-Lucent.com
En
Alcatel-Lucent IPTouch 4018 Phone
Handset
Audio keys
Function keys
Hang-up key:
to terminate a call.
Hands-free/Loudspeaker Key:
to make or answer a call without lif-
ting the receiver (Alcatel-Lucent IP Touch 4008/4018 Phone).
• Lit in hands-free mode or headset mode (short press).
• Flashing in loudspeaker mode (long press).
Intercom/Mute key:
• during a conversation: press this key so that your
correspondent can no longer hear you.
• terminal idle: press this key to answer calls automatically
without picking up the receiver (Not available in 'safe'
mode).
To adjust the loudspeaker or handset volume up or down
Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been
received.
'Redial' key :
to access the 'Redial' function.
Navigation
Up-down navigator:
used to navigate around the home page, through the menus
or in a text zone when entering characters.
The home page consists of:
• information on the status of the set (set locked, call forward, etc.),
• date and time,
• set programming and configuration functions.
OK key:
used to validate your choices and options while programming or configu-
ring.
Back/Exit key:
to return to previous menu (short press) or return to first screen
(long press). You can also use this key to correct a character you entered
.
OK
Function keys and programmable keys
Guide key:
use to obtain the name and number associated with the telephone, in-
formation on the pre-programmed keys or to access the set programming or confi-
guration.
Phone book key :
phone book key to access your personal phone book (short
press) or to make a call by name (long press or press twice)*.
Pre-programmed function keys and programmable key
Lit when the function associated with the key is activated.
The 6-key block consists of:
two line keys,
one 'immediate forwarding or cancel call-forward' key,
one 'conference' key,
one 'transfer' key,
one direct call key to programme.
Only the line keys are enabled in 'safe' mode .
Alphanumeric keypad
This symbol indicates the functions that can be accessed in 'safe' mode .
According to the configuration the telephone system of your company, your phone set can auto-
matically switch to 'safe' mode in case of loss of connection with the system, in order to ensure
continuity of service . For more information, contact your installer or administrator .
The 'safe' mode is only available for 8 Extended Edition Series .
To avoid accidentally damaging the set telephone line connec-
tor, make sure you position the cord correctly in the compart-
ment intended for this purpose
.
!
3
English
Other
Customize your terminal
Modifying your personal code
Lock / unlock your telephone
follow
informations
displayed on the
screen
depending the displayed
informations, enter your password
or confirm*
Settings
OK
Options
OR
Phone
OK
Password
OK
Lock
OK
SIP
Adjusting the audio functions
SIP
Adjusting screen brightness
Using your telephone
SIP
Identify the terminal you are on
SIP
Making a call
SIP
Receiving a call
SIP
Redialling
adjust ringing (melody, volume,
mode,...) by following instructions
displayed on the screen
long press
increase or decrease
the contrast
apply long press
displays your
telephone number
long press
lift the receiver hands free line key / programmed line
key
dial directly the
number for your
call
calling from your personal
directory
dial the number for
your call
To make an external call, dial the outside line access code
before dialling your correspondent's number.
lift the
receiver
hands free
(Alcatel-Lucent IP Touch 4008/
4018 Phone)
line key with light
flashing
last number redial
Settings
OK
Phone
OK
Ringing
OK
Settings
OK
Phone
OK
Contrast
OK
OR
OK
WhoamI
OK
OR OR OR
2
6
5
3
abc
def
jkl
m
n
o
OR
OK
OR
Dial by URI
OK
OR OR
3gv19008bsac.fm Page 3 Lundi, 29. septembre 2008 3:45 15