Aiphone AX-A Intercom System User Manual


  Open as PDF
of 2
 
AX-A, AX-AN (Surface Mount); AX-B, AX-BN (Semi-Flush Mount)
- INSTRUCTIONS -
The AX-A, AX-AN, AX-B, and AX-BN are interior sub stations designed for use with the AX system. The AX-A and
AX-AN sub stations are surface mount and will mount to a single gang box or can be set on a desk or table top.
The AX-B and AX-BN sub stations are semi-flush mount and can be mounted into a 6-⅛" H x 3-¾” W cutout in a
wall, or can be mounted using the model BBX-1E back box. The sub stations with the “N” at the end of the model
number include the PRIVACY feature, which prevents a master station from hearing audio from that sub location
while the Privacy button is engaged.
AX-A
AX-AN
AX-B
AX-BN
Speaker
Mic
Call Button
Privacy Button
8-3/16"
6"
Dimensions same as AX-B
7-1/16"
5⅝"
Dimensions same as AX-A
Pg. 1
Speaker
Mic
Call Button
Privacy Button
MOUNTING AND INSTALLATION:
AX-B/BN
AX-A/AN
Remove the directory cover from the front case using a small fine tip screwdriver. Loosen the screw under
the directory cover and remove the intercom unit from the back chassis. Secure chassis to box or wall using
supplied mounting screws. Connect wires to unit, then reinstall to chassis and reinsert directory cover.